Setting Full Duplex mode Ethernet Interface

Posted by Tux De Luxe at 10:22 09/01/2010
Setting Full Duplex mode Ethernet Interface: "You can check what mode is enabled before:
# ethtool eth1
to change:
# nano /etc/sysconfig/network-scripts/ifcfg-eth1
ETHTOOL_OPTS="speed 1000 duplex full autoneg off"
Restart Interface:
# ifdown eth1 && ifup eth1
Confirm:
# tail -30 /var/log/messages
# ethtool eth1

Posted in networking "